The gearbox is one of the most critical components of a vehicle, and it requires some maintenance and upgrades from time to time so that it runs perfectly. A renowned shop most often takes care of all the inspections to ensure that the gearbox is in top shape. Even if you are not directly approaching your car’s manufacturer, the right car service provider like Automoda will do the needful for you.
Here are some of the things you can expect in terms of maintenance and upgrades from a renowned shop.
1. Condition Monitoring
The shop will ensure that the all-round condition of the gearbox and check for any wear and tear. It will diagnose any problem and fix it for you. This will include cleaning up the gearbox and fixing any faulty parts. Your gearbox should work smoothly so that you can change gears with ease.
2. On-Site Inspection
If you have been working with the service provider long-enough, then you might even enjoy on-site inspection. Some renowned shops provide this service for their new customers as well. You do not have to take your car to the shop to have your gearbox checked. Instead, the technicians will visit you for the service, and you will only have to take the car to them in case of a significant repair.
3. Check the Bearings
The shop will minutely check the gearbox’s load and speed conditions and ensure no problem with bearing selection. The closer tolerance bearing with rolling elements is always better. They will also evaluate the fluid-film bearings so that they match the characteristics of the current operations.
4. Inspect Gearing
While inspecting the gearing, the shop will ensure there is optimum grinding for perfect tooth geometry. They will also opt for in-house heat treatment so that it increases the hardness of gearing. This will result in a smooth change of gears while driving.
5. Lubrication
The shop will ensure that your vehicle has adequate lubrication. They will add oil coolers and will also replace splash lubrication. They make sure that your gearbox performs well and add an external lube system if required. They also help make the shift to duplex filtration, and they upgrade the gearbox’s lip seals to face seals. They also check the drivetrain thoroughly in the process.
6. Reverse Engineering
An experienced service provider will have expert technicians capable of reverse-engineering the gear reducers and related components to achieve maximum efficiency. They can also exchange gear drives. They also have a gear repair rebuild program for any gearbox.
7. Looking into Shaft Seals
The shop will check for oil leaks at both the input as well as the output shaft. A leak could indicate that the seals have failed, and it could allow water and debris to enter the system and hamper the lubrication. You should replace them without delay, or else it could contaminate the gearbox and not result in smooth handling. The shop will ensure that they only use lubrication recommended by the manufacturer.
8. Backlash
A good shop will check for the backlash that often happens between the mesh of the gears. An increase in backlash signifies that the teeth of the gear have some wear and tear. Although not very perceptible, it can affect the rolling elements of the bearings and cause further harm. Industrial gearbox repair can be quite complicated, and you should only trust the most experienced technicians to do the job for you. Engineers working with gearbox will do away with obsolete parts or upgrade them to enhance your vehicle’s lifespan. It will result in easier maintenance in the long run and help you save a lot of money. If needed, renowned shops like Automoda will also offer you custom solutions based on your needs.